New year and new graphics from our designer Nomisake
With the last PCB revision, we add tree power connector to share the power with other instrument.
Lumamix accept voltage from 12 to 20 volts, the voltage present at the rear power in connector, will be shared with the power out connectors, with one power supply you can now power the mixer and other 3 instruments.
The new LUMAMIX it's the last addiction to the Lumanoise family, a four channel RESONANT mixer with send\return and a resonant equalizer, inspired by the Polymoog resonator section.
DEMO VIDEO
 |
Old Version
|
Lumamix has four jack\mini jack audio input, jack\mini jack send\return, the send out it's pre the resonant equalizer and the return can be seen as 5° input.
The main output it's mono jack or stereo mini jack, all the channels go through the resonant equalizer where you can select the type of filter, low pass, band pass, high pass and the frequency range low, medium, high.
The equalizer can resonate, and the cut-off can be controlled via the Light Dependent Resistor, the LDR can be activated with the switch.
The gain knob set the level before the equalizer.
Lumamix works with 12v 500ma tip+.
We can also offer the Lumamix in Euro Rack format.
The Resomix 8HP with 3 input, send\return and CV control over the cutoff frequency.
Lumamix Manual
Volume 1 pot. regulate the volume for the mini jack input 1.
Volume 2 pot. regulate the volume for the mini jack or jack input 2.
Volume 3 pot. regulate the volume for the mini jack or jack input 3.
Volume 4 pot. regulate the volume for the mini jack or jack input 4.
Send out the mixer signal before the resonant equalizer, mini jack or jack out, to use with external effect or as mixer dry out.
Return pot. regulate the volume for the mini jack or jack return input, to use with external effect,
or as 5° input.
Lumamix have one mono jack out and one mini jack stereo out in parallel.
High pass, band pass, low pass switch select the filter type.
High, mid, low switch select the filter frequency range.
Cutoff pot. regulate the cutoff frequency of the filter, when the switch it's on LDR, the light depending resistor will act in parallel to the pot, to obtain the ldd maximum effect keep the cutoff pot to 0.
Resonance pot. regulate the resonance level.
Gain pot. regulate the gain level at the filter input, work as general mixer gain.
Power in Lumamix works with 12v 500ma tip+
Resomix Manual
Volume 1 pot. regulate the volume for the mini jack input 1.
Volume 2 pot. regulate the volume for the mini jack input 2.
Volume 3 pot. regulate the volume for the mini jack input 3.
Send out the mixer signal before the resonant equalizer, mini jack out, to use with external effect or as mixer dry out.
Return pot. regulate the volume for the mini jack return input, to use with external effect,
or as 5° input.
Resomix have one mono mini jack out.
High pass, band pass, low pass switch select the filter type.
High, mid, low switch select the filter frequency range.
Cutoff pot. regulate the cutoff frequency of the filter, the 0-10v CV input affect the cutoff frequency to obtain the CV in maximum effect keep the cutoff pot to 0.
Resonance pot. regulate the resonance level.
Gain pot. regulate the gain level at the filter input, work as general mixer gain.
Resomix works with +/-12v 10pin modular connector.
%20web.jpeg)
